How To Fix Anker Soundcore 2 Speaker Not Charging? – 5 Fixes!

Anker Soundcore 2 is an affordable Bluetooth speaker with an IPX7 rating. It delivers great sound quality with powerful bass. But many customers are facing charging problems. If you’re reading this article, it means your Soundcore 2 speaker is not charging.

Your Soundcore 2 is not charging for several reasons, including a faulty charging cable, a faulty power source, an over-discharged battery, buggy firmware, or a defective battery.

Here I’ll teach you various methods to fix the charging problem with your speaker.

How To Fix Anker Soundcore 2 Speaker Not Charging?

Firstly, I’m sad to know that your portable speaker is not charging. You can try the following troubleshooting to fix it.

1. Change The Cable

Unfortunately, you won’t get USB type C support in Anker’s Soundcore 2 Bluetooth speaker. You get a USB type A to micro USB cable in the box for charging, and it’s very bad in build quality.

In most cases, the charging cable gets frayed or damaged, due to which the Soundcore speaker won’t charge. So, try plugging in another device in that cable to ensure it’s not dead and functioning well.

If your charging cable is damaged or not functioning with another device, please change the cable. You can buy a good quality braided USB type A to micro USB cable from Amazon and see whether the charging problem is fixed.

Click here to check the price of a micro USB cable on Amazon

2. Try Another Power Source

Using a faulty wall outlet will prevent your speaker from being charged. So, firstly you should change the wall outlet, and secondly, try another power adapter because a faulty power source will stop your speaker from charging.

If you’re using an Android fast charger to charge your Soundcore speaker, this could be another reason it’s not charging.

Anker Soundcore 2 speaker needs a 1.5 Amp current input to charge the battery. So, I would advise you to try a 5W or 10W adapter. You can also use a laptop/computer USB to charge your speaker.

3. Reset Your Speaker

Incorrect settings and software bugs could also be a strong reason why a Bluetooth speaker won’t charge. Resetting your speaker will erase all the stored data and restore it to the factory default settings.

A factory reset will fix the charging problem on your Bluetooth speaker. It also fixes connectivity issues and improves the sound quality of your smartphones.

Follow these steps to factory reset Anker Soundcore 2 speaker-

• Remove the charging cable from your speaker.
• Press the power button for 8 seconds to turn on the speaker.
• Hold the Bluetooth button for 10 seconds until the light turns blue.
• Now, press and hold the Volume Up and Play/Pause buttons together for 8 seconds until you hear a voice prompt.

Release the buttons once you hear a voice prompt that informs you that the speaker has powered off. Your Soundcore 2 has been restored to its factory defaults, and now you can plug in the charging cable.

4. Clean The Charging Port

The micro USB port attracts dust and clogs the charging pins. If your charging port looks dirty, turn off the speaker and remove the dust with a toothpick. After removing the dust from the micro USB port, clean the port with a toothbrush and isopropyl alcohol.

Please be gentle while cleaning the charging port because the pins of the micro USB port are very delicate and may be damaged. If any pins are damaged, you should replace the micro USB port.

5. Replace The Battery

If your charging cable and power adapter are functioning and the indicator light glows, but the speaker is not charging, which means your battery is faulty and needs to be replaced. Anker doesn’t provide battery replacement if your speaker is out of warranty period.

You can go to a repair shop and get your speaker battery replaced, or if you’re comfortable working on a circuit broad, please buy a replacement battery online and follow this guide.

Check the price of the Soundcore 2 Speaker’s Battery Replacement on Amazon

6. Defective Circuit Board

If you supply higher amperage (Android’s fast charger), then it will damage the speaker’s circuit board. If your Soundcore 2 speaker is not charging after trying all the above solutions, it means there is some fault on the circuit board.

I would advise you to contact the Anker customer support team and claim the warranty or visit the nearest repair shop if the speaker’s warranty has lapsed. You may need to buy another speaker for yourself because finding a replacement circuit board is very tough.

How Do I Know My Soundcore 2 Speaker Is Charging?

Anker Soundcore 2 Bluetooth speaker has an LED indicator on the top. It indicates the power status of your speaker.

• Blinking Red: It indicates your Soundcore speaker has a low battery.
• Solid Red: It indicates your Soundcore 2 speaker is charging.
• Solid White: It indicates your Soundcore 2 speaker is fully charged.

How Long Does Soundcore 2 Speaker Take To Charge?

The Soundcore 2 speaker has 2600 mAh battery that gives approximately 24 hours of playtime on 60% volume. It takes approximately 3 to 4 hours to charge the battery fully.

Can You Overcharge Anker Speakers?

Generally, all modern electronic devices have battery protection circuits that automatically cut off the current supply once the battery is fully charged. But, the li-ion battery drains slowly even when you don’t use it. So, whenever the battery charge drops, the protection circuit supplies the current, and this cycle repeats.

This continuous charging drops the lifespan of lithium-ion batteries in the long term. So, it’s always advisable to disconnect the charger if your speaker is fully charged.

Also Read: How To Fix Ortizan Speaker Not Charging

Conclusion

Most of the time, the charging problem occurs due to a faulty charging cable, which starts charging when you replace it. I hope this guide helped to fix the charging problems on your Anker Soundcore 2 portable Bluetooth speaker. Please share which method fixed your problem.