How To Fix Ecovacs Deebot Not Charging?- 5 Fixes!

The robotic vacuum cleaner is one of the great innovations of the 21st century. They can help you quickly and easily clean your floor without any effort.

Many popular brands launched their various products in the market, and Ecovacs Deebot is one of them.

You don’t even need to charge it every time manually. You just need to set your Deebot robotic cleaner for the first, and it’ll automatically locate the charging dock when the battery level drops.

However, some users reported battery charging problems in the Deebot robotic vacuum cleaner. It usually happens due to some minor faults and wrong settings.

If your Deebot is not charging, we’ll try to find out the exact reason and troubleshoot the issue.

Also Read: How To Fix Shark Robot Not Charging Problem

Why is my Deebot Not Charging?

There are various reasons why a Deebot robotic vacuum floor cleaner is not charging.

The most common reason is your vacuum robot power button is not turned on or charging sensors are not making the connection with the charging dock because it’s misaligned or metal contacts are dirty.

Let’s have a look in detail-

1. Deebot is Not Powered ON

One of the most common reasons for Deebot not charging is that the robot’s bottom power switch is turned off.

The location of the Power ON button may vary with the model, but I have Deebot 83, which has a power switch on the bottom of the robot.

2. Deebot Max Mode

Another common reason for Deebot not charging is that it’s in Max mode. Deebot is in Max mode, increases the vacuum power by 50%, and doesn’t automatically return to the charging station.

You must manually put it in the charging dock to charge the battery. Either place it in the charging dock with your hands or instruct remotely.

To do that, just press and hold the Home button for about two seconds. The Deebot will make a beep sound and start moving toward the charging station.

3. Battery is fully discharged

If the Deebot doesn’t charge even after following the above steps, the battery will most likely be completely discharged.

It usually happens when you use Deebot for a long time without charging or if it’s kept on for a long time.

In that case, you need to connect the Deebot to the power adapter and charge it for at least three hours. After that, try to turn it on and see if it’s working properly.

Also Read: How To Fix Vax ONEPWR Battery Pack Won’t Charge

4. Dirty Charging Sensors

Another possible reason for Deebot not charging is the dirty charging sensors. These sensors are located at the bottom of Deebot and help it find the charging dock.

If these sensors are covered with dust or debris, Deebot might have trouble finding the dock. As a result, it won’t start charging.

Just take a dry and soft cloth to clean the charging sensors and wipe them gently.

After cleaning the sensors on the charging dock and Deebot robot, charge it for at least 30 minutes.

5. Outdated firmware

If you’re still facing the Deebot not charging issue, then it might be due to outdated firmware. It usually happens when you don’t update Deebot for a long time.

To update the Deebot’s firmware, just connect it to your smartphone or PC and launch the Ecovacs Home app.

After that, follow the on-screen instructions to update the Deebot’s firmware.

After updating the Deebot’s firmware, try to charge it and see if it’s working properly.

6. Battery health issue

The battery health of any device degrades after a certain time. If your cleaning robot is older than two years, you might face a charging-related issue on any device.

Also, usage frequency and charging patterns affect the life of lithium-ion batteries.

It usually happens when you use Deebot for a long time or if it’s kept on for a long time.

As a result, the Deebot’s battery starts degrading and doesn’t work properly.

In that case, you need to replace the Deebot’s battery with a new one. You can call the Ecovacs customer support team and get your battery replaced.

How To Fix Deebot Not Charging?- 5 Easy Solutions

Follow the step-by-step guide to fix the charging issue of the Deebot robotic vacuum cleaner-

Step #1- Turn ON the Power Switch

Flip over your Deebot 83 robotic cleaner and turn on the power switch. The power switch location may vary with the model, so refer to your product manual.

Also Read: How To Fix Lefant Vacuum Robot Charging Problem

Step #2- Clean Charging Points

Remove the power adapter from the wall outlet and remove your Deebot robot from the charging dock.

Now, gently clean the charging contacts with a toothbrush and isopropyl alcohol.

After removing the dust layer with a toothbrush, wipe it with cotton and leave it to dry for 10 to 15 minutes.

After cleaning and drying the charging contacts, re-attach the power adapter to the Deebot and plug it into the wall outlet.

Read Next: How To Fix iLife Robot Charging Problem

Step #3- Turn OFF Max Mode

Max mode increases the vacuum power by 50% to clean stubborn dirt on the floor.

For more power generation, it drains the battery faster, and your robot won’t return to the charging dock.

So, open the Ecovacs Home App on your smartphone and turn off the Max mode if not necessary. Now, manually place your robot on the charging dock and charge it fully.

Also Read: How To Fix Xiaomi Roborock That Won’t Charge

Step #4- Fully Charge Your Battery

Because of the above reasons, your robot battery has drained completely and needs a full charge.

So, leave your Deebot on the charging dock for at least three hours without interruption.

After that, take off your Deebot from the dock and turn it ON to see if it’s working properly or not. If yes, then great! Otherwise, jump to the next step.

Also Read: How To Resolve Roomba Not Charging Problem

Step #5- Update Firmware

If you haven’t updated your Deebot firmware for a long, some minor bugs can also conflict with the device’s proper functioning.

So, it’s always recommended to keep your Deebot firmware up-to-date.

To update the Deebot firmware, connect your Deebot with the Ecovacs Home app and follow the on-screen instructions.

Once the firmware is updated successfully, try charging your Deebot again.

Also Read: How To Fix Dyson Vacuum Charging Problem

Frequently Asked Questions (FAQs)

Conclusion

I hope this guide was helpful and you were able to fix the Deebot not charging issue. If you have any further queries, feel free to ask in the comment section below. Also, don’t forget to share this guide with others who might need it.

Read Next: How To Fix KARCHER Window Vacuum Charging Problem