I purchased OontZ Angle 3 Bluetooth speaker after looking at insane customer reviews on Amazon. Approximately 189 thousand customers rated 4.5 out of 5 stars. That’s why I decided to give it a try. But, many OontZ customers are facing battery charging problems.
Table of Contents
So, this guide will provide various methods to fix the OontZ speaker charging problem. If your OontZ Bluetooth speaker is not charging, this guide will be helpful for you.
Why Is My OontZ Angle 3 Speaker Not Charging?
OontZ speakers need 5 hours of charging time to charge from 0 to 100 percent. Sometimes, it may face problems in charging due to a dirty charging port, broken or frayed charging cable, faulty power adapter, defective battery, buggy firmware, and faulty circuit board. My OontZ was not charging due to a wrong power adapter. I connected to my laptop’s USB hub, and it started charging.
How To Fix OontZ Speaker Not Charging?
I know how frustrating it can be when your speaker battery is low and refuses to take charge. Here are some easy methods to fix the OontZ portable speaker charging problem-
1. Clean The Charging Port
OontZ Solo and Angle 3 are portable Bluetooth speakers that people frequently use for an outdoor parties. Because of outdoor use, the charging port gets dirty, preventing the speaker battery from charging.
Use a toothpick to remove the debris and clean the charging port with a microfiber cloth and isopropyl alcohol. After cleaning the charging port, connect the charger and see whether it’s charging.
2. Reset Your Speaker
A software bug and wrong settings can also create problems in charging. Resetting your OontZ speaker will delete all the stored data and restore it to factory settings.
Follow these steps to reset OontZ portable speakers:
- Press and hold the power button to turn off the speaker.
- Hold the Power and Volume Up (+) buttons together for 5 seconds.
- Please wait 10 seconds and press the Power button to turn it on.
- Go to your smartphone’s Bluetooth settings and remove the old OontZ from the device list.
- Pair it again.
That’s it! Your OontZ speaker has been reset to factory defaults. Now connect the charger and check whether it’s charging.
3. Try Another Charging Cable
If the charging cable is damaged or frayed, your speaker will not charge. Most of the time, a faulty charging cable is the main reason for charging problems. OontZ Angle 3 has a USB type C port, and you can try another smartphone charger. You can buy a replacement cable from Amazon.
4. Try Another Power Source
OontZ speaker requires 5V and 1.0A current for charging. I used an Android fast charger, and my speaker refused to charge. So, I changed the adapter (iPhone 5W adapter), and it started charging.
You can use your laptop USB hub or power bank to charge your OontZ portable speaker.
Also Read: How To Fix JBL Speaker Not Charging
5. Replace The Battery
OontZ speakers have lithium-ion batteries which lose their capacity with time. So, if your speaker is too old, the battery might be depleted and need a replacement. You can buy a battery replacement from Amazon or AliExpress and replace it yourself.
6. Contact Customer Support
If you have tried all the above solutions, but your speaker is still not charging, the circuit board might have a major fault. Please contact OontZ customer support to get it repaired or claim the warranty.
Also Read: How To Fix Tribit Speaker Not Charging
One of the above solutions will fix the charging problem on the OontZ speaker. Perform a factory reset and try charging with a computer USB hub. I hope your speaker is charging again. Please share your valuable feedback in the comment box.