How To Fix Yobola T2 Pro Not Charging? – (5 Methods)

Yobola T2 Pro is a popular waterproof wireless earbud that gives approx 5 hours of playtime on a single charge. And approx 25 hours of playtime with the case.

But, some customers reported the battery charging issue with Yobola T2 Pro earbuds.

Are your Yobola wireless earbuds not charging when you keep them in the charging case?

My friend’s Yobola T2 Pro left earbud wasn’t charging, but I asked him to clean the metal contacts and the charging case with a Q-tip and isopropyl alcohol, and the issue was resolved.

If one of your Yobola earbuds isn’t charging, you should first inspect the metal contacts to see if any dust or debris is blocking their contacts. If yes, clean them thoroughly with rubbing alcohol and cotton.

Yobola T2 Pro Earbuds

Also Read: How To Fix Skullcandy Indy Evo Earbuds Not Charging

Why is Your Yobola T2 Pro Not Charging?

The common reasons for charging issues for Yobola wireless earbuds are improper placement, dust or debris blocking the metal contacts, outdated firmware, and the charging case itself not charging enough.

How To Fix Yobola Earbuds Not Charging?

Here are some easy solutions to fix the charging issue of your Yobola wireless earbuds-

1. Clean Metal Contacts

Clean Metal Contacts Yobola Earbuds Case

Yobola earbuds case is similarly designed to Apple AirPods, which gets dirty over time.

If dust or debris blocks the contacts, one or both earbuds will face the charging issue.

You should clean the metal contacts for uninterrupted current flow from your charging case to both earbuds.

Also Read: How To Fix Audio Technica Earbuds That Won’t Charge

2. Fully Charge Your Case

Yobola Earbuds Case Charged

Current flow from higher potential to lower potential (it’s the rule of physics). If your charging case is not charged enough, it won’t pass current to your earbuds.

So, if your Yobola case is not charged, first charge it fully and then place your earbuds in it.

Also Read: How To Fix Nothing Ear (1) Buds Not Charging

3. Clean Your Earbuds

Yobola Earbuds Charging Pin

There are two metal pins on the bottom of both earbuds. These pins attach to the metal contacts of the charging case, and your earbuds charge.

But, due to sweat and dust, an insulative layer formed around the metal pins, preventing the current flow.

So, thoroughly clean your earbuds with a toothpick and wipe out everything with a rubbing alcohol cotton swab.

Also Read: How To Fix Sony WF-1000XM4 Not Charging

4. Reset Earbuds

Yobola Earbuds Reset

If you have tried all the above steps, you might need to reset your yobola earbuds to fix the pairing and charging issue.

Here is how to reset yobola wireless earbuds-

  • Take both earbuds out of the charging case.
  • Go to your iPhone Bluetooth.
  • Tap on the Info icon (i) next to T2 Pro.
  • Tap on Forget This Device.
  • Confirm the action.
  • Tap and hold on to both of your yobola earbuds.
  • Release your fingers after 10 seconds.
  • Now, put both earbuds in the case and close the lid.

That’s it. Your yobola T2 Pro has been reset. Now, you can pair it again with your iPhone and check whether the charging issue is fixed.

Also Read: How To Fix Soundcore Liberty Earbuds Not Charging

5. Get a Replacement

If you’ve tried all the above solutions but still face problems in charging, it means some manufacturing defect is there with your unit.

Contact the customer care team and ask for a replacement. The company will provide a replacement if your earbuds are under warranty.

Also Read: How To Fix TOZO Earbuds Not Charging

Why is My Yobola Earbuds Case Not Charging?

Yobola Case Charging Port

If your charging case itself isn’t charging, your earbuds won’t charge. It could happen because your charging cable is faulty or something is blocking the USB type-C charging port.

Try a new USB type-C cable and smartphone adapter to charge your Yobola T2 Pro charging case.

Also, remove any debris or dust blocking the charging port. You can use a toothpick to remove debris from the charging port.

Also Read: How To Fix Kurdene Earbuds Not Charging

Note– Do not insert the SIM ejector tool or any metal object in the charging port; otherwise, it will damage internal circuits.

Also Read: How To Fix Mifa Earbuds Not Charging


These are some easy troubleshooting methods for fixing the charging issue of Yobola wireless earbuds.

In most cases, cleaning the metal contacts fixes the issue. If your product is under warranty or replacement period, get it replaced from Amazon.

Also Read: How To Fix Donorton Earbuds Not Charging

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *